PROBLEMS WITH FSrealWX

Good afternoon,

FSRealWX Pro doesn't work fine for me, I don't know...

I have installed FSrealWX in a PC Secondary, and I connect via FSUIPC (registered) with my FS2004 via WideFS. The connect is succesfull, and I use NOAA METARS.

The program download correct METARS, but the injection in to the simulator isn't correct.

In the last flight, in LEJR: LEJR 201130Z VRB3KT CAVOK 30/11 Q1017

I landed, my plane had OAT 23ºC, then it displayed 17ºC. QNH in the airfield was 1014 in the plane.

All the time the same METAR, the same temp and QNH in the plane.....

If I press "SET LEJR WX", FSrealWX injects the METAR correctly, the plane displays 29ºC and 1017.....but 3 minutes then.... the plane displays 23ºC and 1014 another time.

Help please. Is an amazing program, but it doesn't work fine for me.

Thanks.

Hi,
did you try to install and run the FSrealWX-bridge on the simulation PC and then connect from the networkded PC to that bridge?
In settings of FSrealWX in the "interface tab" you should select client/server as interface and then give IP of the sim PC and port of the FSrealWX bridge. Works like a charm
Cheers,
Luc

Hi SkyCamel,

Yes, I tried with FSrealWX-Bridge, the same results for me. Program doesn't work fine, I had the same problem FSUIPC/WideFS and Server Bridge.

But.... NOW FSrealWX works fine for me.

SOLUTION: I have installed FSrealWX in the secondary PC, connected with the Primary PC (FS9) via WideFS/FSUIPC (registered). Connetion succesfully.

In OPTIONS STARTUP, I deselected "Clear WX" option and Wheater Mode in Auto-Mode.

When I start FSrealWX, it injects WX into the FS, then I press "Set ICAO WX" this depens airport where I'm, FSrealWX injects ICAO WX correctly now.

¡Then I only fly....!

NOW FSrealWX WORKS LIKE A CHARM. NOW I'M HAPPY.

Thank You for the software.

Hi,
I'm happy to hear it's working now.
I'm still struggling to get Model-file to work but so far no luck although my networked PC has full access to all drives and folders on my sim PC.
But model file is only used in FSX, so no concern to you.
Cheers,
Luc

I'm unhappy that you're still stuggling to get a correct model-file to work.

If you connect FSX via Simmconnect, you shouldn't have problems with the software.

I simply connect via WideFS in secondary and FSUIPC on primary (PC Machine), throught FSUIPC in FSrealWX options.

Thanks for your words.

Hi,
the normal and auto mode are working fine, just the model-file mode doesn't work.
I know it needs access to the FSX folder and it actually has access (read/write) to the whole harddrive but it doesn't update the weather.
I will figure it out one day, hopefully

Hi !

I'm sure you'll solve it.

Lucky friend